Bi Color LED Driver
Nowadays, the LED has become a very good medium of light.
The reason for which is it has more light with less power.
Generally, these three types of light come to us, which we recognize by the color temperature.
Like warm white light whose color temperature is 2700 Kelvin, it comes up to 4500 Kelvin for neutral white And finally 6500 Kelvin for cool white.
One bulb is of one light type only. How good it would be if a bulb of one type could emit two types of light.
But the beauty of electronics is what you think of what you can create that.
So today we will create such a light which will give two types of colors.
On pressing the button once it emits one color and second time pressing emits the second type of light.
The reason for which is it has more light with less power.
Generally, these three types of light come to us, which we recognize by the color temperature.
Like warm white light whose color temperature is 2700 Kelvin, it comes up to 4500 Kelvin for neutral white And finally 6500 Kelvin for cool white.
One bulb is of one light type only. How good it would be if a bulb of one type could emit two types of light.
But the beauty of electronics is what you think of what you can create that.
So today we will create such a light which will give two types of colors.
On pressing the button once it emits one color and second time pressing emits the second type of light.
Circuit:-
The light of this light is given below.
The light of this light is given below.
Working:-
This circuit is made up of two small circuits. The first part of the circuit is a Schmitt trigger and the second part is a multi-vibrator.
Whenever we press the button, the first part gives a pulse to the next part.
When the next part gets the pulse, it reverses the position i.e. the light which was open closes and that which was closed is now opened.
This happens every time you press the button. This circuit takes the power from the mains itself.
5.1-volt zener provides the regulated power to the circuit. Both MOSFETs are used as the switch for LED.
And they open or close the series of LEDs.
This circuit can be added to any bulb, tube light or any light that you have created.
In addition to the light, if we have to open two circuits one after the other, then we use this circuit.
The ability to run a circuit depends only on the MOSFET rating.
The current circuit is tested with 12W LED light.
Author:- Aniruddh Kumar Sharma
--Ani-Lab--
This circuit is made up of two small circuits. The first part of the circuit is a Schmitt trigger and the second part is a multi-vibrator.
Whenever we press the button, the first part gives a pulse to the next part.
When the next part gets the pulse, it reverses the position i.e. the light which was open closes and that which was closed is now opened.
This happens every time you press the button. This circuit takes the power from the mains itself.
5.1-volt zener provides the regulated power to the circuit. Both MOSFETs are used as the switch for LED.
And they open or close the series of LEDs.
This circuit can be added to any bulb, tube light or any light that you have created.
In addition to the light, if we have to open two circuits one after the other, then we use this circuit.
The ability to run a circuit depends only on the MOSFET rating.
The current circuit is tested with 12W LED light.
Author:- Aniruddh Kumar Sharma
--Ani-Lab--
No comments